BulbSet Technology: fast glide. Confident control.

Smoother skiing. Confident carving. Faster tubing. Discover how our Patented BulbSet Technology combines slightly elevated contact points with a purpose-designed brush surface.

In short

      • Our Patented BulbSet Technology combines slightly elevated contact points with a purpose-designed brush surface.

      • The elevated bulbs reduce contact with the bristles, so skis, snowboards and tubes glide with less drag.

      • PearlSnow adds edge grip for carving, speed control and firm braking, PearlSlide keeps tubes moving, and PearlTile offers deeper edge engagement.

      • In independent testing, all three ranked among the five best-performing surfaces for dry glide.

    A good run has a natural flow. Skis carry momentum between turns. A snowboard moves freely before its edge engages. A tube glides smoothly down the run.

    The surface beneath you plays a major part in that experience. It needs to let equipment slide freely while providing the right interaction for the activity. For skiing and snowboarding, that includes the edge grip needed to turn, control speed and brake firmly.

    Our patented BulbSet Technology brings these requirements together in PearlSnow and PearlSlide. Rounded, slightly elevated bulbs work with the surrounding brush surface to reduce sliding resistance. PearlTile takes the same contact principle into a deeper surface designed for demanding skiing and snowboarding applications.


    How does BulbSet Technology reduce drag for skis, snowboards and tubes?

    The elevated bulbs reduce contact between the surrounding bristles and the underside of a ski, snowboard or tube. Equipment glides over the rounded bulbs with fewer brush contact points and less drag.

    Look closely at PearlSnow or PearlSlide and you will see a regular arrangement of rounded bulbs sitting slightly above the brush surface.

    That small difference in height matters.

    For riders, lower friction helps preserve momentum. Skis and snowboards move more freely between turns. Tubes carry speed along the run. On suitable connections and lift tracks, that same principle helps equipment keep moving through gentler sections.

    The performance comes from the combination of bulb geometry, material and the brush mat beneath it.


    How does PearlSnow combine fast glide with edge grip for skiing and snowboarding?

    PearlSnow combines BulbSet Technology with a flexible brush mat. With the ski or snowboard running flatter, the elevated bulbs help reduce drag. As the rider tips onto an edge and applies pressure, the edge engages more deeply with the bristles and bulb structure, providing grip for carving, speed control and firm braking.

    For skiing and snowboarding, riders need to move freely and trust their edges through a turn. That balance matters at every level.

    For beginners, a surface that glides freely and responds predictably to edging can help build confidence as they learn to turn and stop. Lower drag also contributes to a more snow-like feel, helping movements flow more naturally.

    For experienced skiers and snowboarders, reliable edge engagement supports stronger turns and confident carving at speed. It gives them a surface on which to practise the movements they use on snow: setting an edge, building pressure through the turn and releasing into the next.

    We have carried out extensive testing with our team and gathered feedback from customers to understand how our surfaces perform in use. That practical experience informs our assessment of glide, edge grip and control, alongside laboratory measurements of sliding resistance.


    How does PearlSlide keep tubes moving on a tubing run?

    PearlSlide combines BulbSet Technology with an upright brush surface and rounded bristle tips, designed for low drag and fast sliding. The elevated bulbs reduce contact with the surrounding bristles, helping tubes carry momentum.

    Tubing places a different demand on the surface: smooth acceleration and sustained glide along the run.

    The same focus on glide also makes PearlSlide relevant for selected lift tracks, start areas and ski connections where maintaining movement is a priority.

    PearlSnow and PearlSlide share the technology, with different brush structures to suit different riding experiences.


    How is PearlTile different from PearlSnow and PearlSlide?

    PearlTile applies the same principle of elevated contact points in a different construction.

    The entire tile is made as one piece from one material. Its rounded contact points are built into the surface itself, with some sitting higher than others. These height differences limit the number of points touching the underside of the ski or snowboard during running straight, helping reduce sliding resistance.

    PearlTile also has a deeper surface structure, allowing greater edge engagement when riders tip their skis or snowboard and apply pressure.

    That combination is particularly relevant for elite freestyle inruns, where riders need to carry speed while finding strong edge grip to load their skis or snowboard and initiate rotations at take-off.

    It also suits demanding training sites where powerful carving, high edge angles and deep edge engagement are central to the session.

    PearlTile brings the same design idea into these applications: limited contact for free glide, with depth available for strong engagement on edge.


    How much does BulbSet Technology lower sliding resistance in independent tests?

    PearlSnow, PearlSlide and PearlTile all ranked among the five best-performing surfaces for dry glide.

    To compare sliding resistance, PearlSnow commissioned independent testing by Protection Services Holland B.V. across 11 commercially available synthetic slope surfaces from leading brands.

    The programme included 99 test runs under dry, wet and silicone-treated conditions. Each surface was tested with the same sled, load, contact area and measurement method, with three runs per condition.

    The test measured resistance during continued sliding. Lower resistance means less energy lost to friction as equipment moves across the surface.

    The dry results also showed a clear difference against the corresponding brush surfaces in our own range without BulbSet Technology:

        • PearlSnow recorded approximately 39% lower sliding resistance than DreamSnow.

        • PearlSlide recorded approximately 22% lower sliding resistance than DreamSlide.

      PearlTile placed third in the dry comparison and recorded the lowest sliding resistance of all 11 tested surfaces under silicone-treated conditions. Its measured resistance with silicone treatment was approximately 67% lower than its own dry result.

      These percentages describe reductions in measured sliding resistance for complete surfaces under the stated test conditions.

      Together, the results provide a concrete basis for the glide performance of all three products. Our assessment of edge grip and control draws on the surface construction, extensive team testing and customer feedback.

      This documentation sits alongside our wear and weathering test results as part of the technical evidence available for project review.


      Does water improve glide on a BulbSet surface?

      Yes. All three surfaces responded to water in the comparative test. Against their dry results, measured sliding resistance fell by approximately:

          • 19% for PearlSnow

          • 27% for PearlSlide

          • 15% for PearlTile

        For suitable installations, controlled water application can therefore improve glide further and support a more snow-like riding experience.

        Actual performance depends on the slope, equipment, rider input, surface condition and maintenance. These factors help determine the right setup for each project.


        Which Pearl surface is right for a ski slope, snowboard area or tubing run?

        PearlSnow combines glide with the edge grip needed for skiing and snowboarding, from first turns to confident carving. PearlSlide focuses on carrying momentum for tubing and selected connections. PearlTile applies the same principle in a single-piece surface with deeper edge engagement for demanding freestyle and carving applications.

        Technology you can feel. Performance you can assess.

        The principle behind BulbSet Technology is straightforward: carefully positioned, elevated contact points help equipment glide with less drag.

        For operators, that means a choice grounded in measured performance and practical riding experience. For riders, it means the qualities that make them want another run: flowing movement, responsive turns and confidence in the surface beneath them.

        Planning a ski slope, snowboard training area, freestyle inrun or tubing run? Talk to us about your project and explore the right Pearl surface for your riders, terrain and operating conditions, or request a quote.

        Want to learn more?

        Call Avi - Sales and Partnerships